 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Technical Data Sheet 333/R2C1-AQUB Features Popular T-1 3/4package. High efficiency. General purpose leads. Selected minimum intensities Available on tape and reel. ESD-withstand voltage: up to 4KV The product itself will remain within RoHS compliant version. UV resistant epoxy Descriptions The series is specially designed for applications requiring higher brightness. The LED lamps are available with different colors, intensities, epoxy colors, etc. Superior performance in outdoor environment Applications Single or Dual Color Graphic Signs Message boards Variable message signs (VMS) Commercial outdoor advertising Device Selection Guide LED Part No. 333/R2C1-AQUB Chip Material AlGaInP Emitted Color Hyper Red Lens Color Water Clear Everlight Electronics Co., Ltd. Device Number : DLE-033-B01 http\\:www.everlight.com Prepared date:01-16-2006 Rev 1 Page: 1 of 7 Prepared by:Flourix Chen Technical Data Sheet 333/R2C1-AQUB Package Dimensions Notes: Other dimensions are in millimeters, tolerance is 0.25mm except being specified. Protruded resin under flange is 1.5mm Max LED. Bare copper alloy is exposed at tie-bar portion after cutting. Absolute Maximum Rating (Ta=25) Parameter Forward Current Pulse Forward Current (Duty1/10@ 1KHz) Operating Temperature Storage Temperature Electrostatic Discharge Soldering Temperature Power Dissipation Reverse Voltage Symbol IF IFP Topr Tstg ESD Tsol Pd VR Absolute Maximum Rating 50 160 -40 ~ +85 -40 ~ +100 4K 260 5 130 5 100 Unit mA mA V mW V mA Zener Reverse Current Iz Notes: Soldering time5 seconds. Everlight Electronics Co., Ltd. Device Number : DLE-033-B01 http\\:www.everlight.com Prepared date:01-16-2006 Rev 1 Page: 2 of 7 Prepared by:Flourix Chen Technical Data Sheet 333/R2C1-AQUB Electro-Optical Characteristics (Ta=25) Parameter Luminous Intensity Viewing Angle Peak Wavelength Dominant Wavelength Spectrum Half width Forward Voltage Reverse Current Zener Reverse Voltage Symbol IV 21/2 p d VF IR Vz Min. 3600 ----1.8 -5.2 Typ. -15 632 624 20 ---Max. 11250 --IF=20mA --2.6 10 -V A V VR=5V Iz=5mA nm Unit mcd deg Condition Rank Combination (IF=20mA) Rank Q R 4500~5650 S 5650~7150 T 7150~9000 U 9000~11250 Unit:mcd Luminous Intensity 3600~4500 *Measurement Uncertainty of Luminous Intensity: 15% Rank Forward Voltage 1 1.8~2.0 2 2.0~2.2 3 2.2~2.4 4 2.4~2.6 Unit:V *Measurement Uncertainty of Forward Voltage: 0.1V Rank Dominant Wavelength 1 2 3 626~630 Unit:nm 618~622 622~626 *Measurement Uncertainty of Dominant Wavelength 1.0nm *The quantity ratio of the ranks is decided by EVERLIGHT. Everlight Electronics Co., Ltd. Device Number : DLE-033-B01 http\\:www.everlight.com Prepared date:01-16-2006 Rev 1 Page: 3 of 7 Prepared by:Flourix Chen Technical Data Sheet 333/R2C1-AQUB Typical Electro-Optical Characteristics Curves Relative Intensity vs. Wavelength 1.0 0.8 0.6 0.4 0.2 0.0 550 Forward Current vs. Forward Voltage 50 Forward Current(mA) 600 650 700 750 Relative Intensity 40 30 20 10 0 1.0 1.5 2.0 2.5 3.0 3.5 Wavelength(nm) Forward Voltage(V) Relative Intensity vs. Ambient Temp Relative Luminous Intensity(%) Forward Current vs. Relative Intensity 2.5 2.0 1.5 1.0 0.5 0.0 Relative Luminous Intensitu(%) 2.0 1.5 1.0 0.5 0.0 25 30 35 40 45 50 55 60 O 65 70 0 10 20 30 40 50 Ambient Temperature Ta( C) Forward Current(mA) Forward Current vs. Ambient Temp. 90 O Radiation Characteristics 60 O 30 O 0 O 10 O Relative Intensity(a.u.) 50 1.0 20 O 30 O O Forward Current(mA) 40 40 30 20 10 0 50 O 0.5 60 O 70 O 80 O 0 20 40 60 80 O 100 0 0 0.5 90 1.0 O Ambient Temperature Ta( C) Radiation Angle Everlight Electronics Co., Ltd. Device Number : DLE-033-B01 http\\:www.everlight.com Prepared date:01-16-2006 Rev 1 Page: 4 of 7 Prepared by:Flourix Chen Technical Data Sheet 333/R2C1-AQUB Packing Quantity Specification 1.500PCS/1Bag5Bags/1Box 2.10Boxes/1Carton Label Form Specification EVERLIGHT CPN: P/N: 333/R2C1-AQUB QTY LOT NO CPN: Customer's Production Number P/N : Production Number QTY: Packing Quantity CAT: Ranks of Luminous Intensity and Forward Voltage HUE: Ranks of Dominant Wavelength REF: Reference LOT No: Lot Number MADE IN TAIWAN: Production Place CAT: HUE: REF: MADE IN TAIWAN Everlight Electronics Co., Ltd. Device Number : DLE-033-B01 http\\:www.everlight.com Prepared date:01-16-2006 Rev 1 Page: 5 of 7 Prepared by:Flourix Chen Technical Data Sheet 333/R2C1-AQUB Notes 1. Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification. 2. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 3. These specification sheets include materials protected under copyright of EVERLIGHT corporation. Please don't reproduce or cause anyone to reproduce them without EVERLIGHT's consent. 4. Below the zener reference voltage Vz, all the current flows through LED and as the voltage rises to Vz, the zener diode "breakdown." If the voltage tries to rise above Vz current flows through the zener branch to keep the voltage at exactly Vz. 5. When the LED is connected using serial circuit, if either piece of LED is no light up but current can't flow through causing others to light down. In new design, the LED is parallel with zener diode. if either piece of LED is no light up but current can flow through causing others to light up. Everlight Electronics Co., Ltd. Device Number : DLE-033-B01 http\\:www.everlight.com Prepared date:01-16-2006 Rev 1 Page: 6 of 7 Prepared by:Flourix Chen Technical Data Sheet 333/R2C1-AQUB 6. Soldering Condition Careful attention should be paid during soldering. When soldering, leave more then 3mm from solder joint to case, and soldering beyond the base of the tie bar is recommended. Avoiding applying any stress to the lead frame while the LEDs are at high temperature particularly when soldering. Recommended soldering conditions: Hand Soldering Temp. at tip of iron Soldering time Distance 400 Max. (30W Max.) 3 sec Max. 3mm Min.(From solder joint to case) Preheat temp. Bath temp. Bath time. Distance DIP Soldering 100 Max. (60 sec Max.) 265 Max. 5 sec Max. 3mm Min. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http:\\www.everlight.com Everlight Electronics Co., Ltd. Device Number : DLE-033-B01 http\\:www.everlight.com Prepared date:01-16-2006 Rev 1 Page: 7 of 7 Prepared by:Flourix Chen |
Price & Availability of R2C1-AQUB
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |